Check seatbelt path.
→ Familiarise yourself with the restraint’s seatbelt path.
Most booster seats have colour coding to show you where to thread the seatbelt.
Seat child in sit.
→ Place the child into the restraint in their normal clothing (not in bulky jackets etc.).
Make sure the child is sitting upright and to the back of the seat.
Buckle child in.
→ Feed seatbelt through seatbelt guides and over the child.
→ Make sure there are no twists in the seatbelt.
A twisted seatbelt is dangerous and will make it so the seatbelt does not sit properly on the child.
Check seatbelt position.
→ The sash part of the seatbelt should be sitting in the middle of the child’s shoulder. If the seatbelt is touching or close to the child’s face or neck then it is too high.
→The lap belt should sit low on the child’s hips, not across their stomach.
→ The seatbelt should be fed under the armrests. This applies to both the lap and sash parts of the seatbelt on the buckle side (Note: not all booster seats have armrests).
→ Make sure the seatbelt is firm on the child for every trip.
Check seatbelt position.
→ If the booster has one, make sure the anti-submarining guide is hooked on correctly to the lap portion of the seatbelt. This must always be used in between the legs.